K2, Marauder Splitboard 159

Built as a workhorse to access any backcountry zone, the K2 Marauder Splitboard Package is the perfect partner for the skin track and the reliable companion atop a steep couloir.

The core is built from three sustainable timber species and is surrounded by our ICG™️ 10 Biaxially Woven Fiberglass with Carbon for stability and snap on both the ascent and descent. Weaving Carbon Fiber stringers into the fiberglass gives the Marauder liveliness without adding extra weight or overdoing it on the torsional rigidity.

Our Sintered P-Tex sidewalls are incredibly durable, create a smooth, damp feel, and help us reduce overall waste during the manufacturing process.

Our tough-as-nails matte top sheet material helps us keep the weight down for cruising on the skin track, and our Sintered 4000 base is rugged and durable.

A sintered base retains wax better for long days in the alpine.

We know backcountry touring can put a beating on your board both on the way up and on the way back down, so we used a black material along the riding surface for seamless repairs after those inevitable rock encounters.

This Marauder Package is equipped with Voile style binding mount pucks, mounting hardware, and pre-cut Pomoca™ 70/30 Mohair Blend skins.

The Marauder Split Package pairs perfectly with the K2 Far Out splitboard binding and the K2 Swiftstick 3-piece collapsible pole. Shop the K2 entire split collection.

FLEX:

CONSTRUCTION:

PROFILE:

TERRAIN PERFORMANCE:

 

 

SINTERED 4000 BASE:

Our Sintered 4000 base absorbs wax deep into the material for relentless glide and unrivaled durability.

 

BAP CORE:

Bamboo. Aspen. Paulownia. We’ve blended three species of renewable timber to assemble a core that’s strong, lightweight, and designed to enhance dampening without the addition of other materials.

 

ICG™ 10 GLASS WITH CARBON:

 

Integrating Carbon Fiber stringers that run the length of the board into our fiberglass increases the snap of the snowboard without adding unnecessary rigidity.

 

 

MOUNTING HARDWARE:

Standard M6 mounting hardware. (Standard splitboard components for mounting your favorite splitboard binding.)

 

POMOCA® CLIMBING SKINS:

The classical proven POMOCA mix skin developed for every snowboarder. Lightweight and with an accurate design, it will always help you to reach your goals.

 

SPLITRACK™ INSERTS:

Narrow channels take the place of standard binding screw inserts for nearly unlimited stance widths and binding placement.